Intrepid Video & Electronics


Fisher VCR repair tips


Copyright Intrepid Video & Electronics

FISHER

FVH800/900 SERIES Power on indicator turns on when pressed, goes off after a few secs. No operation. Loading IC LB1649
FVH840 No audio, intermittent chroma, some video distortion Change all caps on IF board.
FVH904 Power, LED goes out, display flashes. Q503(ECG159), buried under wiring.
FVH920 Tape load, pl, ff, rew inop. Replace cass load belt, capstan belt
FVH922 Will not take tape, stop light flashes. Dew sensor.
FVH960 Mostly noise in tuner, low noisey audio Demodulator caps, high ESR
FVH2512 Parts ID: LED prism #6450133183
FVH4100 Sound, no pic, looks like bad heads Shorted C201, on pre-amp.
FVH4200 New tire doesn't solve idler problem. Replace clutch.
FVH4502 No record video 3 caps on video pre-amp board (47/6.3v)
FVH4503 Won't unload tape properly. Tension band sticky
FVH4903 Randomly eats tapes Mode switch-645 008 7837
FVH4909 *Eject, power button jammed.

*Dead, fuse open. Shorted FET

*Re-connect top plastic face plate.

*Q5002, 5004(2SC2274); Q5003(2SA984);Q5001(2SK1691); C5001(47/200v)

FVH6200 Accepts cassette, plays, won't eject. Cam by load worm, not engaging. Replace lever, on bottom which drives slide on top.
FVH6300 *Eats tapes.

*Will not load cassette

*Lubricate mode switch.

*Look for broken cam and loading gears, top deck

FVH7600 Turns on, light blinks, turns off in secs. STK5464