Intrepid Video & Electronics Copyright © Intrepid Video & Electronics |
| 16-410 | No vert./no audio | R1025(10 ohm @1/4 watt) |
| 16-415 | Tape stuck, drum running all the time | IC101 AN7806(ECG962) |
| 16-507 (model 18) | Stops playing after 3 secs. | Replace t/u reel sensor. |
| 16-510A | *Won't play at right speed *Head cylinder changes speed, bad play back. *No tuning 78105, neara tuner gets hot |
*IC02 *C2, C3,C5 on cylinder servo bd., 10/16v NP *TD6382 IC near tuner |
| 16-552 | No power, no display | C09, BP 22/16v |
| 16-611 (16-700) | Lines in pic., distorted like dirty heads, slight audio buzz. | Solder and/or ru jumper for broken connections under shield on pre-amp board. |
| 16-651 | Display flashes, motor noise | C15, C16 bad. |
| 16-652 | Excess tape not being taken in during eject. | Clean mode switch |
| 16-618 | Intermittent power failure-noise from power supply | C09, in power supply |
| 16-622 | Intermittently eject, intermittent play | Mode switch |
| MVR2040A | Plays very slow, 60 MHz hum | C508, 82/200v, bad |
| MVR2135A | Won't take tape | Worn belts & mode switch (0520244003) |