Intrepid Video & Electronics


SEARS VCR TIPS


Copyright Intrepid Video & Electronics

Sears
562-40291500 1" vetical sweep Replace Q304
564-****(Fisher) *Stops flashes, won't eject

*No display, no power, except at plug-in

*Dead, timer light flashes

*Dew sensor

*IC503-LB1649

*Q1 in power supply(2SD1348)

564.53482950 *Tuner only receives few channels, DC input to tuner is 50v instead of 30v

*Cassette load inop., small gear broken

*D512 on power supply board

*Gear front load(613-022-2534 or IW72)
Gear (613-077-3586 or IW103)

564.53492850 *Dead, timer light flashes

*Will only accept/eject cassettes part way

*Q01(2SD1348) in power supply

*Replace capstan motor

580.53428290 Won't load ZD103, power supply. 13.6v missing
580.53445950 No ff, all other functions work Remove idler, reposition pin in center all the way up.
580.53447190 No pl/FF/REV, just kicks out tape-may hear clicking, from clutch Replace lever, in clutch assembly. Spring tab broke. Goldstar #333-201B
580.53478290 *No display, t/u reel spins in any position

*Intermittent FF/REW. Mechanism seems to not catch cam gear.

*IC101 on main board(6v reg) & Q105. Replace Q10, ZD101 in power supply.

*Replace cam gear, ramp is worn.

580.53483090 *Tape intermittently jumping off drawer pin w/ annoying noise. Eats intermittently

*No sound, play back or tuner

*Replace/repair clutch

*IC401 (P/N 46-133611-3)

934.44717490 Intermittent dead, tape may get stuck Loose connections 68/1w resistor @C9021 next to FBT
580.55114490 Dead IC101 open(KIA7806, 6v reg),C106(47/35v)
580.55127790 *Audio sometimes a roar or muted

*Accepts tape, then ejects

*Re-solder PMD03

*LED p/n 903-01487-01

580.55127790 *Audio sometimes a roar or muted

*Accepts tape, then ejects

*Re-solder PMD03

*LED p/n 903-01487-01

934.55156690 Dead C620 220/16v